Description
12.88 inch Resolution 1920 x 1080,TDDI drive IC,interface 2-port LVDS(DE mode),The TFT module is a color active matrix thin film transistor (TFT) liquid crystal display (LCD). LTPS LCD composes this model, TDDI drive IC, FPC (flexible printed circuit),PCBA, backlight & Coverglass unit.
- For detailed parameter specification, please contact us to provide LCD display specification.
- Backlight brightness can be selected, general brightness:250~300cd/m², medium brightness:400~500cd/m²;high brightness 800~1000cd/m²;
- can be customized according to customer requirements, change FPC interface, backlight brightness, shape and structure dimensions;
- can be equipped with resistive or capacitive touch screen according to customer’s needs; can choose a variety of laminating methods, frame laminating, OCA all-lamination;
No. |
Item |
Specification |
Unit |
Note |
1 |
LCD size |
12.88 |
inch |
|
2 |
Resolution |
1920 x RGB x 1080 |
— |
|
3 |
Touch uniformity |
Minimum baseline of the Xn* Yn points / Maximum baseline of the Xn* Yn points*100%≥ 85% |
|
Test by |
4 |
Color pixel alignment |
RGB Vertical Stripe |
|
|
5 |
TFT Technology |
LTPS |
— |
|
Touch Technology |
In-cell |
— |
|
6 |
Display mode |
Normal Black |
— |
|
7 |
Active Area |
285.12(W)*160.38(H) |
mm |
|
8 |
Pixel pitch |
0.1485 (W) * 0.1485 (H) |
mm |
|
9 |
Aspect ratio |
16:9 |
|
|
10 |
TPM Outline Dimension |
299.9(W)*182.08(H)*8.67(T) |
mm |
w/o protective film |
11 |
Interface |
2-port LVDS(DE mode) |
|
|
12 |
Color bit |
24 bit(VESA) |
|
|
13 |
Wet Finger |
support |
|
|
14 |
Polarizer surface treatment |
HC |
|
|
15 |
Environmental Protection
Requirement |
RoHS |
— |
|
16 |
Report Rate |
120Hz |
|
|
17 |
Accuracy(φ8mm) |
+/-1mm for Center area , +/-
1.5mm for border area |
|
|
18 |
Linearity (Ф8mm) |
+/-1mm for Center area , +/-
1.5mm for border area |
|
|
19 |
Jitter(Ф8mm) |
+/-1mm for Center area |
mm |
|
20 |
Two finger separation
(Ф8mm) |
12 |
mm |
|
21 |
SNR Requirement |
≥40dB |
|
|
22 |
Support Finger NO. |
10 |
|
|
24 |
Move Sensitivity(Min
Touch Size) |
Min φ6mm, Center<=1.0mm
No disconnection |
|
|
25 |
Glove Support |
support |
|
≤2mm |
Hongcai lcd ips screen manufacturer offer superior quality that exceeds industry standards. Our products are consistently free of color distortion, with uniform color and brightness across all batches. Designed to meet both industrial and consumer-grade production requirements, our displays provide stable quality, reliable performance, and continuous supply.
Interface
BLU FPC Pin Assignment.
1 |
VLED A1 |
VLED+ Anode1 |
2 |
VLED A2 |
VLED+ Anode2 |
3 |
VLED A3 |
VLED+ Anode3 |
4 |
NC |
No connect |
5 |
NTC+ |
Thermal Sensor For LED |
6 |
NTC- |
Thermal Sensor For LED |
7 |
NC |
No connect |
8 |
VLED C3 |
VLED- Cathode 3 |
9 |
VLED C2 |
VLED- Cathode 2 |
10 |
VLED C1 |
VLED- Cathode 1 |
FPC1 Pin Assignment. (Suitable connector: FH28K-60S-0.5SH)
PIN |
SYMBOL |
FUNCTION |
I/O/P |
Remarks |
1 |
GND11 |
Ground |
P |
|
2 |
FAIL_T |
Fail detection output signal. |
O |
|
3 |
VDD2 |
3.3v Power supply for logic and analog |
P |
|
4 |
VDD1 |
3.3v Power supply for logic and analog |
P |
|
5 |
VDD0 |
3.3v Power supply for logic and analog |
P |
|
6 |
NC10 |
No connect |
– |
|
7 |
RESET |
Global reset pin |
I |
|
8 |
NC(PON) |
Sleep In. Power-on mode setting pin. Active high |
I |
BYD NC |
9 |
DISP |
Display On. Display mode setting pin. Active high |
I |
|
10 |
AGING |
BIST MODE. Active high |
I |
|
11 |
ID1 |
ID PIN ( H ), just for customer, no use for CSOT |
O |
CSOT NC |
12 |
GND10 |
Ground |
P |
|
13 |
0D0P |
Odd LVDS differential data input 0+ |
I |
|
14 |
OD0N |
Odd LVDS differential data input 0- |
I |
|
15 |
GND9 |
Ground |
P |
|
16 |
OD1P |
Odd LVDS differential data input 1+ |
I |
|
17 |
OD1N |
Odd LVDS differential data input 1- |
I |
|
18 |
GND8 |
Ground |
P |
|
19 |
OD2P |
Odd LVDS differential data input 2+ |
I |
|
20 |
OD2N |
Odd LVDS differential data input 2- |
I |
|
21 |
GND7 |
Ground |
P |
|
22 |
OCLKP |
Odd LVDS Clock input + |
I |
|
23 |
OCLKN |
Odd LVDS Clock input – |
I |
|
24 |
GND6 |
Ground |
P |
|
25 |
OD3P |
Odd LVDS differential data input 3+ |
I |
|
26 |
OD3N |
Odd LVDS differential data input 3- |
I |
|
27 |
GND5 |
Ground |
P |
|
28 |
ED0P |
Even LVDS differential data input 0+ |
I |
|
29 |
ED0N |
Even LVDS differential data input 0- |
I |
|
30 |
GND4 |
Ground |
P |
|
31 |
ED1P |
Even LVDS differential data input 1+ |
I |
|
32 |
ED1N |
Even LVDS differential data input 1- |
I |
|
33 |
GND3 |
Ground |
P |
|
34 |
ED2P |
Even LVDS differential data input 2+ |
I |
|
35 |
ED2N |
Even LVDS differential data input 2- |
I |
|
36 |
GND2 |
Ground |
P |
|
37 |
ECLKP |
Even LVDS Clock input + |
I |
|
38 |
ECLKN |
Even LVDS Clock input – |
I |
|
39 |
GND1 |
Ground |
P |
|
40 |
ED3P |
Even LVDS differential data input 3+ |
I |
|
41 |
ED3N |
Even LVDS differential data input 3- |
I |
|
42 |
GND0 |
Ground |
P |
|
43 |
NC5 |
No connect |
– |
|
44 |
ID3 |
ID PIN( L ) , just for customer, no use for CSOT |
O |
CSOT NC |
45 |
ID2 |
ID PIN( H ), just for customer, no use for CSOT |
O |
CSOT NC |
46 |
LCM_SCL |
Serial interface clock input |
I |
|
47 |
LCM_SDA |
Serial interface address and data input for SPI interface |
I/O |
|
48 |
LCM_CSX |
Serial interface chip enable signal. For customer, pull this pin up
when not using it |
I |
|
49 |
NC1 |
No connect |
– |
|
50 |
VOTP |
OTP PIN——For FOG maker use, must be floating for customer |
P |
|
51 |
NC12 |
No connect |
– |
|
52 |
NC13 |
No connect |
– |
|
53 |
TP_RST |
Touch reset |
I |
|
54 |
GND12 |
Ground |
P |
|
55 |
TP_INT |
TP interrupt line. |
I |
|
56 |
TP_SCL |
Touch I2C data. This pin has been pulled up to VCC through a 4.7K
resistor on TPM. IIC ADDR:0x46(7bit,Master)、0x47(7bit,Slave) |
I |
|
57 |
TP_SDA |
Touch I2C data. This pin has been pulled up to VCC through a 4.7K resistor on TPM |
I/O |
|
58 |
NC14 |
No connect |
– |
|
59 |
NC15 |
No connect |
– |
|
60 |
TP_VDD |
Touch power supply |
P |
CSOT NC |