8 inch tft lcd display with Capacitive Touch Screen

►Size 8.0 inch
►Resolution:800 * RGB * 1280 pixel
►View Direction:IPS
►Interface:MIPI
►Driver IC:JD9365DA
►CTP: capacitive touch screen PCAP
►Brightness(cd/m²): 900
►Outline Dimension: 114.60(W)* 184.10(H) * 2.60(T) mm

8 inch tft lcd display with touch screen 800*1280 TFT LCD display is very stable. with Capacitive Touch Screen. The resolution is 800×1280 pixels and the aspect ratio is 10:16. This TFT display uses an JD9365DA driver IC supporting MIPI interfaces. This 8-inch screen is IPS/Free/ Full viewing angle type,With the IPS technique, the display allows viewers to view the screen from wider viewing angles (85/85/85/85 degrees). This 8 inch screen is IPS/Free/ Full viewing angle type.It also features a high brightness of 900 cd/m2.
This LCD module is highly versatile. It can operate at temperatures from -20°C to +70°C; its storage temperature ranges from -30°C to +80°C.

Specifications

Size 8.0 inch
LCM Dimension 114.60(W)* 184.10(H) * 2.60(T) mm
LCD Active Area 107.64 * 172.22 mm
Number OfDots 800 * RGB * 1280 pixel
LCD Type a-Si TFT
Viewing Direction ALL O’clock
Driver IC JD9365DA
Interface Type MIPI 4lanes
Operating Temperature -20℃~ 60℃
Storage Temperature -30℃~ 80℃
Backlight Type 24 LEDs

Drawing

8 INCH LCD DISPLAY

PIN

LCM PIN

NO. Symbol Description
1-3 LEDA Power supply for Black Light,Anode
4 GND Ground
5-8 LEDK Power supply for Black Light,Cathode
9-10 GND Ground
11 D2+ MIPI-DSI Data differential signal input pins. (Data lane 2)
12 D2- MIPI-DSI Data differential signal input pins. (Data lane 2)
13 GND Ground
14 D1+ MIPI-DSI Data differential signal input pins. (Data lane 1)
15 D1- MIPI-DSI Data differential signal input pins. (Data lane 1)
16 GND Ground
17 CLK+ MIPI-DSI CLOCK differential signal input pin
18 CLK- MIPI-DSI CLOCK differential signal input pin
19 GND Ground
20 D0+ MIPI-DSI Data differential signal input pins. (Data lane 0)
21 D0- MIPI-DSI Data differential signal input pins. (Data lane 0)
22 GND Ground
23 D3+ MIPI-DSI Data differential signal input pins. (Data lane 3)
24 D3- MIPI-DSI Data differential signal input pins. (Data lane 3)
25 GND Ground
26 TE Serves TE (Tearing Effect ) pin on MPU interface
27 RESET Reset pin
28 ID LCD ID
29 IOVCC 1.8V I/O    Power Supply (1.8V)
30-31 VDD 3.3V Power Supply(2.8V)

CTP PIN

NO. Symbol Description
1 SDA I2C Data Singal
2 SCL I2C Clock Singal
3 RST Reset Pin For CTP
4 INT Interrupt Singal
5 VCC 3.3V POWER SUPPLY(3.3V)
6 GND Ground

 

Video

Torna in alto

LOGO-1.png